HVACMatch
Denton · Denton County · Texas

HVAC contractors in Denton, TX

Tell us what's wrong with the furnace or AC, and we'll pass it to one HVAC contractor that works Denton.

What to watch for here: Denton's fee schedule effective October 1, 2026 lists a $50 flat fee for mechanical work.

Residents
146,987
Homes pre-1980
28.3%
Median home value
$325,700

Figures above: Census ACS 2019 to 2023 five-year estimates (B01003, B25034, B25077). Census figures in the text below come from the newer ACS 2020 to 2024 release.

Get matched with an HVAC contractor in Denton

It costs nothing and has three steps: the job, where the system is, then how to reach you.

What needs work?
Something else · all 11 services

We check that someone covers your ZIP before the form asks for a phone number.

You pay nothing; the heating and cooling company that takes your request pays us. How it works

Heating and cooling in Denton

Replacing HVAC or a furnace in Denton requires a Mechanical Permit, and the city's page says the energy code report test form must be uploaded to the permit before the Mechanical Final inspection. A Mechanical Rough inspection is added if it is a new install. If you aren't replacing same for same, the page says, energy code compliance will be required. The Building and Health Permit Fee Schedule, effective October 1, 2026 (Ordinance 26-1576), lists in Table 3 an "MEP Flat Fee (i.e.

Service Update, Water Heater, Mechanical)" of $50. For building-permit electrical, mechanical and plumbing it lists a minimum fee of $0.22 per square foot, with a $50 minimum. Small replacements use the MEP Permit Application, and plans go in online through eTRAKiT or in person at the Development Services Center, 401 N Elm Street. Denton's Residential Permits page lists the city's amendments to the 2021 International Mechanical Code, the 2021 International Residential Code and the 2021 International Fuel Gas Code, along with the 2020 National Electrical Code.

Denton's Doors page states that door replacements are subject to 2021 energy codes and applicable amendments. ACS estimates for 2020 to 2024 put Denton's median year built at 1997 and 22.0% of its units in the years 1950 through 1979. Whether the new unit replaces the old one same for same is the question that brings in the energy code requirement.

What heating and cooling work costs near Denton

Nobody's given us a quote for work in Denton yet, so this page can't show a city price. The Texas page lists the estimates with what technicians earn (the Texas mean in May 2025 BLS wage data is $28.43 an hour, which is their pay, not your price) and some city permit fees. How we estimate costs.

Permits for heating and cooling work in Denton

Texas cities issue the permit for replacing a furnace, air conditioner or heat pump, and each city sets its own fee; the ones cited on our Texas page all require one. TDLR licenses the air conditioning and refrigeration contractor, so ask for that license number as well as what your city's permit office needs.

Ready when you are.Say what the furnace or AC is doing, and your request goes to one heating and cooling company that works Denton.
Get matched
Get matched